How To Build a Portable Stage in Just 5 Easy Steps

If you are planning to have an outdoor party or event then you need know how to build a portable stage. You can even have a bonfire party or you can have the best Portable PA system to entertain your guest. No matter if you are hosting a wedding, get-together or sporting event you may be in need of the sturdy platform to attract the attention of your guest.

You can either build a portable stage, rent it or you can buy it, but if you want to build it by yourself then here is the guide that may help you. The guide will help you to know what you will need in order to meet the demands of different type of gathering.

How To Build a Portable Stage

How To Build a Portable Stage in 5 Steps

There can be nothing good than an easy 5 step solution. These steps are easy to follow and they are chosen in such a way to allow anyone to make the portable stage. So, let’s dive into the steps

Step 1: Choosing the Accurate Size

Before starting making the portable stage you need to make sure what size do you want and how much space you have. Moreover, you need to consider how many guest are coming your event.

You may want to avoid the overcrowding so you need to make the accurately sized platform. If you make it too big than you will have less place for placing other things and if you have small platform then you may not be able to address your gathering easily.

If you are confused at the first step then there is not shame to call an event planner. There are many platforms that can come to the rescue whether it is industry standard or DIY made.

Step 2: Materials

After knowing the size now you can start gather the material and then assembling it. You need to keep in mind that you need best materials for every section. In general to make raised platform you will need

  • 8’ piece of 2” x 4” lumbar piece 6 in quantity
  • 1 sheet of ¾ inches thick plywood or you can have the measurements as 8’ x 4’
  • 3” 24 wooden screws
  • 5” 26 wooden screws
  • 5” 12 hexagonal bolts
  • More than 12 nuts
  • More than 24 Washers

You may require extra screws or bolts because during the project the screws as well as bolts can be misplaced so you need to have extra of them so that you can make the stage in time.

Now to assemble it you will need tools like

  • Pliers
  • Drill
  • Circular Saw
  • Ratchet
  • Measuring Tape
  • Screwdriver
  • Pencil
  • Sandpaper
  • Hammer

In addition to this you need to take care of your safety and you need to wear the safety gear before working on the project.

Step 3: Making Frame

Now after assembling the materials, you need to make the base frame. It is very important that you keep in mind the first step because if you know the size accurately you can make a very study portable platform.

To make a frame you can cut three 45 inches long section from the lumbar you have just gathered after that lay it on the ground parallel to each other. General practice is to place them 4 feet away.

Now you need to have two of the 8 feet long lumbar to complete the frame. You need to place all boards lying on the 2 inch wide side of the board that will be going to make the frame 4 inches tall.

If you need taller frame you can use more length. Now use 2 to 3 inch wood screws at the joints to keep the frame together. You can drill pilot holes in them to avoid splitter the lumbar into 2. You can also make use of the glue to ensure the sturdiness of the platform but you can make it sturdy with just the help of the screws.

Step 4: Make Legs and Braces

After making the frame now you need to make the legs as well as braces. Now use the remaining lumbar and cut them into 2 foot section to use them as legs.  You need to have 6 one foot section to be placed at 45 degrees of angle.  This will be come in handy as braces.

You need to put one leg at each corner of the frame you just made. You also need to place 2 legs in the center for providing the frame support. Now attach the 8 foot board by drilling the holes in them. You can have bolts, nuts and washers to hold the frame and the legs together.

Profession Tip: You need to hold the nut steady with the plier or with the ratchet to easily tighten the screw. You can also use the 3 inch wood screw to attach braces between the legs and the frame. This will ensure the stability of the platform.

Step 5: Finishing The Platform

Now you have attached the legs to the frame it is the time for the final construction. You can attach a sheet of plywood with 1.5 inches of wood screws 16 inches apart along with the edges. To provide more stability to the frame you can add additional sheet of the plywood.

However, you need to make you that all of the platforms are of the same height because unequal height may cause tripping hazard. You can drill holes in the outside edges of the each section. You can also create a platform by bolding the sections.

At this moment you will be able to know How To Build a Portable Stage. So, for the final step you need to sand it thoroughly and you can apply coats of the black outdoor paint of another paint of your liking. You can also attach fabric to the area under the stage. If you want to avoid the tripping or slipping hazard you can also apply anti slip tape in areas where the tripper can occur.

It is a portable stage so after the even you can unscrew the bolts and you can remove the legs to store the platform easily

You can Also Buy it Online

Conclusion

To host a perfect event many people do different thing and if you want to start the project then you can easily build yourself a portable platform. However, if you are busy then you can easily buy it or even rent it.  You can also take help of the event planner.

To know How To Build a Portable Stage only 5 steps are required and you can go through them in the article. The portable stage can serve many purposes and once you made the stage you will be proud of yourself and your project.